MGP WRM2 Especificaciones descargar pdf (Pagina 21)

TelePole WR/ Operating & Maintenance Manual Page 21

6. Setting ID Number

Note: Setting the ID # must be done only by an authorized user.

The ID # includes 6 digits.

The second digit in the ID # sets the instrument type. TelePole’s first digit is (0).

Setting and Checking the ID #:

• Unscrew the calibration screw located on the back of the meter. Turn the internal switch to

the calibration position.

• The SET LCD's are displayed.

1 - Long press on MODE push-button (5 sec.) - In/out display and set ID #.

2 - Short press on LIGHT push-button - Increases displayed digit value.

3 - Short press on RESET push-button - Displays next digit value.

For example:

The default ID# is:

d1.9

d1.6

0.00

d2.0

Display reading

Digit’s value

ID# digit

906325

9 06 001

Id1.9

Id4.3

= ID #

Serial # of Instrument

Year

Designates Instrument type: TelePole

Designates Portable Instrument

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 57 58

Sin comentarios

MGP WRM2 Especificaciones Pagina 21